With the increasing demand for goods, the pressure on the use of automatic packaging machines can be imagined, and biomass pellet packaging scales from the early manual packaging to semi-automatic packaging and then to fully automatic packaging production, to the production of enterprises has brought a strong development guarantee. The occasional failure of the machine after a long time of work is also reasonable, then the operator needs to make some understanding of these failures, in order to be able to better deal with the emergency failure, now about the common faults and solutions of the machine let us understand it together!

1 Biomass particle packaging scale in the bag cutting may appear in the position of the deviation, and the gap between the middle of the color mark is too large, the color calibration position failure and photoelectric tracking compensation out of control, this situation should first adjust the position of the photoelectric switch, if not, it is necessary to clean the molding machine, the packaging material inserted into the guide board to adjust the position of the guide board, so that the light spot and the middle of the color mark overlap.

2. During the packaging process, the paper feed motor of the packaging machine is stuck or uncontrolled. First check whether the paper feed control rod is stuck, whether the starting container is damaged, whether the safety tube is faulty, and then replace it according to the inspection results.

3. The sealing of the packaging container is not tight, this phenomenon will not only waste materials, but also because some materials are powder, easy to spread, polluting the packaging equipment and workshop environment. In this case, it is necessary to check whether the packaging container meets the relevant regulations, remove the inferior packaging container, and try to adjust the sealing pressure and increase the heat sealing temperature.